黑马程序员技术交流社区

标题: 【上海校区】如何使用 python 接入虹软 ArcFace SDK [打印本页]

作者: 梦缠绕的时候 时间: 2019-9-12 14:50
标题: 【上海校区】如何使用 python 接入虹软 ArcFace SDK

公司需要在项目中使用人脸识别SDK，并且对信息安全的要求非常高，在详细了解市场上几个主流人脸识别SDK后，综合来看虹软的Arcface SDK比较符合我们的需求，它提供了免费版本，并且可以在离线环境下使用，这一点非常符合我们对安全性的要求。但有个遗憾的事情，我们的项目主要使用了Python语言，虹软官方并没有提供Python版本的SDK，因此我自己使用Python封装了Arcface C++ SDK，便于在项目中使用，这里将主要过程写出来供大家探讨下。

1.环境说明
a.注意Win64环境的Python必须使用ArcFace C++(Win64) SDK,如果平台不一致，否则可能会出现以下错误。

[size=1em]

1	OSError: [WinError 193] %1 不是有效的 Win32 应用程序

b.由于SDK中涉及到内存操作，本文使用了ctypes包和cdll包提供的以下几种方式

[size=1em]

c_ubyte_p = POINTER(c_ubyte)
memcpy = cdll.msvcrt.memcpy
malloc = cdll.msvcrt.malloc
malloc.restype = c_void_p
free = cdll.msvcrt.free

2.Arcface SDK基本数据结构封装

在封装数据结构时，一定要注意参数类型,否则可能会导致程序出错。

[size=1em]

class MRECT(Structure): # 人脸框
_fields_ = [(u'left', c_int32),
(u'top', c_int32),
(u'right', c_int32),
(u'bottom', c_int32)]

class ASFVersion(Structure): # 版本信息版本号构建日期版权说明
_fields_ = [
('Version', c_char_p),
('BuildDate', c_char_p),
('CopyRight', c_char_p)]

class ASFSingleFaceInfo(Structure): # 单人脸信息人脸框人脸角度
_fields_ = [
('faceRect', MRECT),
('faceOrient', c_int32)]

class ASFMultiFaceInfo(Structure): # 多人脸信息人脸框数组人脸角度数组人脸数
_fields_ = [
(u'faceRect', POINTER(MRECT)),
(u'faceOrient', POINTER(c_int32)),
(u'faceNum', c_int32)]

class ASFFaceFeature(Structure): # 人脸特征人脸特征人脸特征长度
_fields_ = [
('feature', c_void_p),
('featureSize', c_int32)]

class ASFFace3DAngle(Structure): # 人脸角度信息
_fields_ = [
('roll', c_void_p),
('yaw', c_void_p),
('pitch', c_void_p),
('status', c_void_p),
('num', c_int32)]

class ASFAgeInfo(Structure): # 年龄
_fields_ = [
(u'ageArray', c_void_p),
(u'num', c_int32)]

class ASFGenderInfo(Structure): # 性别
_fields_ = [
(u'genderArray', c_void_p),
(u'num', c_int32)]

class ASFLivenessThreshold(Structure): # 活体阈值
_fields_ = [
(u'thresholdmodel_BGR', c_float),
(u'thresholdmodel_IR', c_int32)]

class ASFLivenessInfo(Structure): # 活体信息
_fields_ = [
(u'isLive', c_void_p),
(u'num', c_int32)]

3.Arcface SDK接口封装

a.接口封装之前需要加载dll库，Arcface SDK 提供的dll都需要加载。
b.本文中图片格式使用了ASVL_PAF_RGB24_B8G8R8。
c.每个接口都需要定义返回值以及参数类型，某些参数类型依赖前文所述的基本数据结构。

[size=1em]

from arcsoft_face_struct import *
from ctypes import *
from enum import Enum

face_dll = CDLL("libarcsoft_face.dll")
face_engine_dll = CDLL("libarcsoft_face_engine.dll")

ASF_DETECT_MODE_VIDEO = 0x00000000
ASF_DETECT_MODE_IMAGE = 0xFFFFFFFF

ASF_NONE = 0x00000000
ASF_FACE_DETECT = 0x00000001
ASF_FACE_RECOGNITION = 0x00000004
ASF_AGE = 0x00000008
ASF_GENDER = 0x00000010
ASF_FACE3DANGLE = 0x00000020
ASF_LIVENESS = 0x00000080
ASF_IR_LIVENESS = 0x00000400

ASVL_PAF_RGB24_B8G8R8 = 0x201

class ArcSoftFaceOrientPriority(Enum):
ASF_OP_0_ONLY = 0x1,
ASF_OP_90_ONLY = 0x2,
ASF_OP_270_ONLY = 0x3,
ASF_OP_180_ONLY = 0x4,
ASF_OP_0_HIGHER_EXT = 0x5,

activate = face_engine_dll.ASFActivation
activate.restype = c_int32
activate.argtypes = (c_char_p, c_char_p)

init_engine = face_engine_dll.ASFInitEngine
init_engine.restype = c_int32
init_engine.argtypes = (c_long, c_int32, c_int32, c_int32, c_int32, POINTER(c_void_p))

detect_face = face_engine_dll.ASFDetectFaces
detect_face.restype = c_int32
detect_face.argtypes = (c_void_p, c_int32, c_int32, c_int32, POINTER(c_ubyte), POINTER(ASFMultiFaceInfo))

extract_feature = face_engine_dll.ASFFaceFeatureExtract
extract_feature.restype = c_int32
extract_feature.argtypes = (c_void_p, c_int32, c_int32, c_int32, POINTER(c_ubyte),
POINTER(ASFSingleFaceInfo), POINTER(ASFFaceFeature))

compare_feature = face_engine_dll.ASFFaceFeatureCompare
compare_feature.restype = c_int32
compare_feature.argtypes = (c_void_p, POINTER(ASFFaceFeature),
POINTER(ASFFaceFeature), POINTER(c_float))

set_liveness_param = face_engine_dll.ASFSetLivenessParam
set_liveness_param.restype = c_int32
set_liveness_param.argtypes = (c_void_p, POINTER(ASFLivenessThreshold))

process = face_engine_dll.ASFProcess
process.restype = c_int32
process.argtypes = (c_void_p, c_int32, c_int32, c_int32, POINTER(c_ubyte),
POINTER(ASFMultiFaceInfo), c_int32)

get_age = face_engine_dll.ASFGetAge
get_age.restype = c_int32
get_age.argtypes = (c_void_p, POINTER(ASFAgeInfo))

get_gender = face_engine_dll.ASFGetGender
get_gender.restype = c_int32
get_gender.argtypes = (c_void_p, POINTER(ASFGenderInfo))

get_3d_angle = face_engine_dll.ASFGetFace3DAngle
get_3d_angle.restype = c_int32
get_3d_angle.argtypes = (c_void_p, POINTER(ASFFace3DAngle))

get_liveness_info = face_engine_dll.ASFGetLivenessScore
get_liveness_info.restype = c_int32
get_liveness_info.argtypes = (c_void_p, POINTER(ASFLivenessInfo))

4.封装接口调用

接下来按照下面的流程图介绍接口调用（此图使用 Microsoft Visio 2016自动生成）。

下图是按照此流程处理得到的效果图，由于画面有限，只显示了年龄、性别、活体信息。

a.激活
需要注意app_id和sdk_key需要使用字节类型。

[size=1em]

app_id = b""
sdk_key = b""
ret = arcsoft_face_func.activate(app_id, sdk_key) # 激活
if ret == 0 or ret == 90114:
print("激活成功")
else:
print("激活失败:", ret)

b.初始化
初始化需要将所有需要的功能参数一次性传入，本文使用了人脸检测、特征提取等功能。

[size=1em]

mask = arcsoft_face_func.ASF_FACE_DETECT | \
arcsoft_face_func.ASF_FACE_RECOGNITION | \
arcsoft_face_func.ASF_AGE | \
arcsoft_face_func.ASF_GENDER | \
arcsoft_face_func.ASF_FACE3DANGLE |\
arcsoft_face_func.ASF_LIVENESS

engine = c_void_p()
ret = arcsoft_face_func.init_engine(arcsoft_face_func.ASF_DETECT_MODE_IMAGE,
arcsoft_face_func.ArcSoftFaceOrientPriority.ASF_OP_0_ONLY.value[0],
30, 10, mask, byref(engine))
if ret == 0:
print("初始化成功")
else:
print("初始化失败:", ret)

c.人脸检测

本文使用了opencv读图，兼容性更好，并且自定义的数据结构记录图片信息，注意 ArcFace C++ SDK 要求传入的图像宽度需要是4的倍数，下面做了裁剪。

[size=1em]

class Image:
def __init__(self):
self.width = 0
self.height = 0
self.imageData = None

def load_image(file_path):
img = cv2.imread(file_path)
sp = img.shape
img = cv2.resize(img, (sp[1]//4*4, sp[0]))# 四字节对齐

image = Image()
image.width = img.shape[1]
image.height = img.shape[0]
image.imageData = img
return image

###################### 人脸检测 ##################################

image1 = load_image(r"1.jpg")
image_bytes = bytes(image1.imageData)
image_ubytes = cast(image_bytes, c_ubyte_p)

detect_faces = ASFMultiFaceInfo()
ret = arcsoft_face_func.detect_face(
engine,
image1.width,
image1.height,
arcsoft_face_func.ASVL_PAF_RGB24_B8G8R8,
image_ubytes,
byref(detect_faces)
)

if ret == 0:
print("检测人脸成功")
else:
print("检测人脸失败:", ret)

d.特征提取

特征提取只支持单人脸，因此做了人脸处理操作，并且需要及时将提取的人脸特征拷贝一份，否则会被覆盖。

[size=1em]

single_face1 = ASFSingleFaceInfo()
single_face1.faceRect = detect_faces.faceRect[0]
single_face1.faceOrient = detect_faces.faceOrient[0]

face_feature = ASFFaceFeature()
ret = arcsoft_face_func.extract_feature(
engine,
image1.width,
image1.height,
arcsoft_face_func.ASVL_PAF_RGB24_B8G8R8,
image_ubytes,
single_face1,
byref(face_feature)
)

if ret == 0:
print("提取特征1成功")
else:
print("提取特征1失败:", ret)

feature1 = ASFFaceFeature()
feature1.featureSize = face_feature.featureSize
feature1.feature = malloc(feature1.featureSize)
memcpy(c_void_p(feature1.feature),
c_void_p(face_feature.feature),
feature1.featureSize)

e.特征比对

按照前文所述再提取一张人脸的特征，即可以进行下面的人脸特征比对操作

[size=1em]

compare_threshold = c_float()
ret = arcsoft_face_func.compare_feature(
engine, feature1, feature2, compare_threshold
)

free(c_void_p(feature1.feature))
free(c_void_p(feature2.feature))

if ret == 0:
print("特征比对成功，相似度:", compare_threshold.value)
else:
print("特征比对失败:", ret)

f.年龄、性别、3D Angle

process接口目前提供了年龄、性别、3D Angle、活体检测，但年龄、性别、3D Angle支持多人脸，而活体只支持单人脸，因此下面分别处理。

[size=1em]

process_mask = arcsoft_face_func.ASF_AGE | \
arcsoft_face_func.ASF_GENDER | \
arcsoft_face_func.ASF_FACE3DANGLE

ret = arcsoft_face_func.process(
engine,
image1.width,
image1.height,
arcsoft_face_func.ASVL_PAF_RGB24_B8G8R8,
image_ubytes,
byref(detect_faces),
c_int32(process_mask)
)

if ret == 0:
print("process成功")
else:
print("process失败:", ret)

######################## Age ################################

age_info = ASFAgeInfo()
ret = arcsoft_face_func.get_age(engine, byref(age_info))

if ret == 0:
print("get_age 成功")
age_ptr = cast(age_info.ageArray, POINTER(c_int))
for i in range(age_info.num):
print("face", i, "age:", age_ptr)
else:
print("get_age 失败:", ret)

####################### Gender #################################

gender_info = ASFGenderInfo()
ret = arcsoft_face_func.get_gender(engine, byref(gender_info))

if ret == 0:
print("get_gender 成功")
gender_ptr = cast(gender_info.genderArray, POINTER(c_int))
for i in range(gender_info.num):
print("face", i, "gender:",
"女性" if (gender_ptr == 1) else (
"男性" if (gender_ptr == 0) else "未知"
))
else:
print("get_gender 失败:", ret)

####################### 3D Angle #################################

angle_info = ASFFace3DAngle()
ret = arcsoft_face_func.get_3d_angle(engine, byref(angle_info))

if ret == 0:
print("get_3d_angle 成功")
roll_ptr = cast(angle_info.roll, POINTER(c_float))
yaw_ptr = cast(angle_info.yaw, POINTER(c_float))
pitch_ptr = cast(angle_info.pitch, POINTER(c_float))
status_ptr = cast(angle_info.status, POINTER(c_int32))
for i in range(angle_info.num):
print("face", i,
"roll:", roll_ptr,
"yaw:", yaw_ptr,
"pitch:", pitch_ptr,
"status:", "正常" if status_ptr == 0 else "出错")

else:
print("get_3d_angle 失败:", ret)

g.RGB活体

在活体检测之前建议按照实际场景设置活体阈值，不设置即使用默认阈值，这里设置了RGB活体的阈值为0.75。并将检测的多人脸分别转为单张人脸的参数传到接口中。

[size=1em]

######################### 活体阈值设置 ###############################
threshold_param = ASFLivenessThreshold()
threshold_param.thresholdmodel_BGR = 0.75
ret = arcsoft_face_func.set_liveness_param(engine,threshold_param)

if ret == 0:
print("set_liveness_param成功")
else:
print("set_liveness_param 失败:", ret)

temp_face_info = ASFMultiFaceInfo()
temp_face_info.faceNum = 1
LP_MRECT = POINTER(MRECT)
temp_face_info.faceRect = LP_MRECT(MRECT(malloc(sizeof(MRECT))))
LP_c_long = POINTER(c_long)
temp_face_info.faceOrient = LP_c_long(c_long(malloc(sizeof(c_long))))

for i in range(detect_faces.faceNum):
temp_face_info.faceRect[0] = detect_faces.faceRect
temp_face_info.faceOrient[0] = detect_faces.faceOrient

ret = arcsoft_face_func.process(
engine,
image1.width,
image1.height,
arcsoft_face_func.ASVL_PAF_RGB24_B8G8R8,
image_ubytes,
byref(temp_face_info),
c_int32(arcsoft_face_func.ASF_LIVENESS)
)

if ret == 0:
print("process成功")
else:
print("process失败:", ret)
## RGB活体检测
ret = arcsoft_face_func.process(
engine,
image1.width,
image1.height,
arcsoft_face_func.ASVL_PAF_RGB24_B8G8R8,
image_ubytes,
byref(temp_face_info),
c_int32(arcsoft_face_func.ASF_LIVENESS)
)

if ret == 0:
print("process成功")
else:
print("process失败:", ret)

liveness_info = ASFLivenessInfo()
ret = arcsoft_face_func.get_liveness_info(engine, byref(liveness_info))

if ret == 0:
print("get_liveness_info 成功")
liveness_ptr = cast(liveness_info.isLive, POINTER(c_int))
print("face", i, "liveness:",
"非真人" if (liveness_ptr[0] == 0) else (
"真人" if (liveness_ptr[0] == 1) else (
"不确定" if (liveness_ptr[0] == -1) else (
"传入人脸数>1" if (liveness_ptr[0] == -2) else
(liveness_ptr[0])
)
)
))
else:
print("get_liveness_info 失败:", ret)

转自
https://www.cnblogs.com/jdjd123/p/11510224.html

作者: 梦缠绕的时候 时间: 2019-9-12 14:50
有任何问题欢迎在评论区留言

作者: 梦缠绕的时候 时间: 2019-9-12 14:50
或者添加学姐微信
DKA-2018

欢迎光临黑马程序员技术交流社区 (http://bbs.itheima.com/)

黑马程序员IT技术论坛 X3.2